Besure the oil capacity is the same in both fork . legs. 6. is in good condition. Apply the . recommended fork oil to the O-ring. Temporarily install the fork damper to the . outer tube (1). After installing the fork leg (page 120), tighten . the fork damper to the specified torque using a . 2013 Honda CRF250R; 2012 Honda
Forhardcore racing, these are MXA’s recommended 2012 Kawasaki KX450F fork settings (stock settings are in parentheses): Spring rate: 0.50 kg/mm (0.48 kg/mm) Oil height: 320cc (335cc
Decreasethe fork oil amount (left front fork). Rear End “Kicks” When Braking on Bumps -. The rear shock absorber rebound damping m ay be. too low. •.
justfill the forks till oil overflows, then put your caps on and go:ride: it will work great. Haha, yeah, an old friend of mine switched bikes some 10 years ago, from an old KX 125 to an YZ 125 -97. The older KX had 41 mm fork tubes, the YZ had 46 mm. By those numbers he reasoned that there should be at least 100-200 ml more in each fork leg.
xRES.